F3271, Tecsis Viet Nam, Stock Pitesco

Công ty TNHH kỹ thuật công nghệ và dịch vụ Tiên Phong

D5 KDC Miếu Nổi, Đinh Tiên Hoàng, P3, Q.Bình Thạnh

Website:   www.pitesvietnam.com                                                       

                www.sensor-encoder.com                         

               www.tecsis.com

Model F3271

Shear Beam, from 510 kg up to 10197 kg

---

Service and Support

Phone:

0914 738 179

E-Mail:

trinh@pitesco.com

Datasheet

This typical load cell in shear beam design is constructed to have a high accuracy of 0,04% (optionally 0,02%) of the Full Scale. The Model F3271 series can be used to measure static compression or tension forces. It is available for nominal loads in the range of 510 to 10197 kg.

Features

• Designed for the weighing of loads
• Also for force measurement useable 
• Typical shear beam design
• Accuracy of 0,04% full scale, optional 0,02% full scale
• Capaities starting from 510 kg 
• Force applied through a blind hole
• Protection class IP 68/ IP 69k

Measuring Ranges

0...510 kg up to 0...10197 kg

Application

Those force transducers are used in numerous application with the need for high accuracy and a robust design. The high accuracy allows to use the model F3271 series in weighing technology. The force transducers can also be used to measure static compression or tension forces. The bending beam is is mounted by using the two fastening bores on the cable side.The force is applied at the opposite side, vertically to theaxis of load cell via a through-hole. Because of the stainless steel construction and high protection class IP68/IP69k, they suit for the use in tough environments. The special calibration technique (mV/V/Ohm) allows to pass on corner balancing when using several load cells.