Hydraulic Force Measurement

Hydraulic Force Measurement
Hydraulic ring force transducers, compression force transducers and accessories all reliable and all from one source.

Thứ Tư, 29 tháng 7, 2015

S6410, Tecsis Viet Nam, Pitesco

Công ty TNHH kỹ thuật công nghệ và dịch vụ Tiên Phong

D5 KDC Miếu Nổi, Đinh Tiên Hoàng, P3, Q.Bình Thạnh

Website:   www.pitesvietnam.com                                                       
                www.sensor-encoder.com                         

               www.tecsis.com


Model S6410

Mechanical Temperature Switch S6410


These temperature switches are designed for use in rough industrial environment. Due to the used bimetallic disc technology and a special build-up of the switches, they are suitable for applications with high vibrations.

There are standard models available with plug connector acc. to DIN EN 175301-803, in brass as well as in stainless steel. The certain electrical connections allow a quick installation of the switch. The ingress protection corresponds up to IP66/67, when the plugs are connected.

Bimetals are the basis of these temperature switches. The sensing of the temperature results from a bimetal disc, which is inside the stem. This disc snaps over, if the defined switching temperature is reached. As switching function, there are available NC (Normally Closed) and NO (Normally Open). After cooling down to the reset switching point (hysteresis usually 30K), the switch returns to its initial state. As the bimetal disc is not carrying current, imprecise switching because of self-heating or arcing can be eliminated.

Không có nhận xét nào:

Đăng nhận xét